Adjust for the surface
Set the dish angle around roof or wall slopes so the installation is easier to align.
Adjustable Roof Wall Mount Kit for Starlink Gen 2
Adjustable Roof Wall Mount Kit for Starlink Gen 2
SKU:XL0161
通常価格
$39.99
セール価格
$39.99
通常価格
$0.00
単価
あたり
配送料はチェックアウト時に計算されます。
Adjustable roof/wall mount for Starlink Gen 2
Give your Starlink Gen 2 a cleaner, stronger outdoor mounting position.
This adjustable roof and wall mount kit helps secure Starlink Gen 2 or High Performance setups on roofs and walls where angle, surface slope, cable routing, and long-term stability all matter.
For Gen 2 / High PerformanceRoof or wall setup110 lb supportCable management
Check compatibility ->
Heavy-duty steel support
Thickened steel construction supports up to 110 lb / 50 kg for a more stable Gen 2 setup.
Cleaner cable path
Integrated cable management helps keep the installation neat and reduces loose cable clutter.
Fit check
Designed for Starlink Gen 2 and High Performance installations.
- Specifically made for Starlink Gen 2 and High Performance models.
- Roof and wall mounting design with adjustable angle for different slopes.
- Allows full dish rotation without obstruction when installed correctly.
- Rust-resistant coated steel is built for long-term outdoor exposure.
- Snap-in design helps secure the dish quickly after the mount is installed.
Starlink dish, router, extension cable, Ethernet adapter, wall anchors, sealant, and installation tools are not included unless clearly stated in the selected product option.
Why it helps
A fixed Gen 2 install needs angle control, cable control, and a strong surface.
Ground placement is easy to start with, but it is not always clean for long-term use. A roof or wall mount can move the dish away from foot traffic, snow, pets, vehicles, and cable mess while helping the antenna face a better open-sky direction.
Choose the mounting surface
Pick a roof or wall area that is structurally sound and has a clear sky view.
Set the angle
Adjust the mount around the roof or wall slope before final tightening.
Route the cable cleanly
Keep cable runs protected from sharp edges, pinch points, standing water, and loose hanging sections.
Key details
Built for outdoor Gen 2 roof and wall installations.
Product typeAdjustable roof/wall mount kit
CompatibilityStarlink Gen 2 / High Performance
MaterialThickened rust-resistant steel
Support capacityUp to 110 lb / 50 kg
Install styleRoof or wall mounting
Cable featureBuilt-in cable management
Dish installSnap-in design
Best use cases
For Gen 2 users who want a cleaner permanent or semi-permanent install.
Home and cabin roofsMove Starlink Gen 2 above ground obstacles and route the cable into a cleaner entry point.
Exterior walls and shedsUse the adjustable angle to work with vertical surfaces and different install heights.
RV sites and remote buildingsBuild a stable Gen 2 setup where the dish should stay out of the way but still remain serviceable.
Install reminder
The mount is only as strong as the surface and fasteners behind it.
Before installing, check the structure, surface material, fastener type, roof sealing needs, wind exposure, and cable entry point. For roof work or elevated installs, use proper fall protection or hire a qualified installer.
Complete the Gen 2 installation
Strongly related add-ons for cable reach, wired networking, and adapter organization.
Cable reach
Replacement Extension Cable for Gen 2
Add length when the best roof or wall mount location is farther from the router or cable entry point.
View product
Wired network
SPX to RJ45 Ethernet Adapter Coupler
Useful when a Gen 2 install needs a cleaner wired Ethernet path without cutting original cables.
View product
Adapter storage
Ethernet Adapter Bracket for Gen 2
Keep the Ethernet adapter organized near the wall, desk, or network area after the dish is mounted.
View productImportant notes
- Confirm your Starlink model before purchase. This mount is for Starlink Gen 2 and High Performance setups.
- Choose fasteners and anchors based on the roof or wall material. Extra hardware may be required.
- Seal roof or wall penetrations properly to help prevent water intrusion.
- Leave cable slack and protect the cable from sharp bends, pinching, and exposed abrasion points.
FAQ
Starlink Gen 2 roof/wall mount questions
Is this mount compatible with Starlink Gen 2?
Yes. It is designed for Starlink Gen 2 and High Performance models.
Can it be installed on both roofs and walls?
Yes. The adjustable design is made for roof and wall mounting, including surfaces with different slopes.
How much weight can it support?
The source product information lists support up to 110 lb / 50 kg when installed correctly on a suitable surface.
Does it include cable management?
Yes. The mount includes built-in cable management to help keep the installation cleaner and reduce loose cable clutter.
Does it include the Starlink dish or cable?
No. This product is the mount kit only unless the selected product option clearly states otherwise.
What should I pair with it?
A Gen 2 replacement extension cable, SPX to RJ45 adapter coupler, and Ethernet adapter bracket are strong add-ons for a cleaner fixed Gen 2 installation.
