Fixed roof support
Designed for users who want a more permanent Starlink roof, wall, or structure-mounted setup.
-
セール
-
-
-
-
-
Starlink Gen 3 Heavy-Duty Pivot Roof Mount Bracket Kit
Starlink Gen 3 Heavy-Duty Pivot Roof Mount Bracket Kit
SKU:XL0217
通常価格
$86.00
セール価格
$86.00
通常価格
$100.00
単価
あたり
配送料はチェックアウト時に計算されます。
Stainless steel roof mount for Starlink
Build a stronger fixed roof setup with a stainless steel pivot tube bracket kit.
This roof mount bracket kit is made for Starlink fixed installations that need a stable tube support, adjustable direction, and outdoor-ready hardware. Choose the straight pipe or elbow pipe option based on your roof, wall, or structure layout.
Straight or elbow pipeStainless steel tubeProtective padFor fixed installs
Check compatibility ->
Adjustable direction
The pivot tube layout helps you choose the angle and direction that fit your installation surface.
Tube protection
A protective pad helps reduce scratching and improves the fit around the mounting tube.
Compatibility check
Choose this for fixed tube mounting, not temporary magnetic or suction placement.
- Best for Starlink fixed roof, wall, pole, shed, cabin, farm, and outdoor structure installations.
- Available in Straight pipe and Elbow pipe options. Select the shape that fits your mounting direction.
- Bracket inner diameter is about 53 mm / 2.08 in.
- Designed for round tubes with outer diameter about 38-50 mm / 1.49-1.96 in.
This kit requires a secure mounting surface and proper installation. Starlink dish, router, cable, power supply, and waterproof roof pass-through parts are not included unless purchased separately.
Why it helps
A fixed Starlink setup needs more than a loose pole.
For long-term roof or structure installs, the tube support has to handle weather, vibration, angle changes, and cable routing. This stainless steel kit gives the installation a more organized bracket, tube, hardware, and protective pad so the setup feels cleaner and more dependable.
Pick pipe shape
Choose straight pipe for vertical layouts or elbow pipe when the roof angle or direction needs an offset.
Confirm tube fit
Check the tube diameter range and make sure the protective pad can sit correctly around the round tube.
Secure the base
Install into a strong roof, wall, or structural surface and keep the cable path sealed and strain-free.
Key details
Hardware-focused kit for roof and structure mounting.
Product typeRoof mount bracket kit
OptionsStraight pipe / Elbow pipe
Main materialStainless steel
Bracket inner diameterAbout 53 mm / 2.08 in
Round tube outer diameterAbout 38-50 mm / 1.49-1.96 in
Use scenariosRoof, wall, cabin, farm, shed, pole, outdoor structure
Best use cases
Made for long-term outdoor Starlink installations.
Metal roofs and utility buildingsUse a fixed tube setup where the dish needs better height and open-sky positioning.
Cabins, farms, and remote propertiesBuild a steadier installation for locations where the Starlink setup stays in place.
Wall or structure mountingUse the bracket kit when a ground stand, suction mount, or magnetic mount is not enough.
Complete the fixed install
Strongly related add-ons for cable length, power, and clean routing.
Cable extensionStarlink Gen 3 / Mini Extension Cable
Useful when the roof mount location needs more cable reach to the router or indoor entry point.
View product
Power option100-240V AC to DC Power Supply
A relevant power add-on for fixed indoor or structure-based Starlink setups.
View product
Cable routingNo-Drill Cable Routing Panel
Helps route cable more cleanly through RV, cabin, shed, van, boat, or wall-adjacent installs.
View productImportant notes
- Select Straight pipe or Elbow pipe based on your installation angle and mounting surface.
- This product is a roof mount bracket kit. Starlink dish, router, cable, power supply, and waterproof cable pass-through parts are not included unless purchased separately.
- Install only on a surface that can safely support the dish, bracket, wind load, and outdoor conditions.
- Seal all roof or wall penetrations properly to reduce water-entry risk.
FAQ
Stainless steel roof mount questions
What Starlink setup is this mount for?
It is made for fixed Starlink roof, wall, pole, or structure-mounted tube installations, especially where a pivot tube bracket is needed.
Should I choose Straight pipe or Elbow pipe?
Choose Straight pipe for more direct vertical mounting. Choose Elbow pipe when your roof angle or structure needs an offset direction.
What tube size does it support?
The bracket inner diameter is about 53 mm / 2.08 in and is designed for round tubes with outer diameter about 38-50 mm / 1.49-1.96 in.
Is this a temporary mount?
No. This is better for fixed or semi-fixed installations. For temporary vehicle use, a suction or magnetic mount may be more convenient.
Does the kit include the Starlink dish?
No. The kit includes mounting hardware only. Starlink dish, router, cable, and power accessories are not included unless purchased separately.
What accessories pair best with it?
A Starlink extension cable, power supply, and cable routing panel are the strongest matches for a clean fixed installation.
