Router and power in one spot
Organize the Standard V3 router and power supply together instead of leaving parts loose on a table or floor.
CTMODS KEEPS YOUR STARLINK POWERED, MOUNTED, AND READY FOR ANYWHERE.
🚚 FREE SHIPPING ON ORDERS OVER $99 — NO IMPORT TAX
SKU(재고 관리 코드):XL0005
All-in-one mount for Starlink Gen 3
This all-in-one mount is made for Starlink Gen 3 / Standard V3 router and power supply organization, helping keep the router, power supply, and cable path off the floor and easier to manage.

Organize the Standard V3 router and power supply together instead of leaving parts loose on a table or floor.
Use the mount area to guide the power cord and network cables for a tidier Gen 3 setup.
Designed for a fixed indoor mounting point near power, network gear, or the main Starlink cable route.

Fit check
Confirm your Starlink model before ordering. This mount is for Standard V3 / Gen 3 router and power supply organization, not for every Starlink router generation.
Installation flow
The source product steps show a simple wall-mounted workflow: fix the bracket, place the power supply, store the power cord behind the bracket, connect power and network cables, then align the Gen 3 router into the mount.
Install the bracket on a suitable wall or fixed surface near power and cable routing.
Push the power supply into the slot and organize the power cord behind the bracket.
Connect power and network cables, then align the V3 router with the bracket slot and push it down to fasten.

Key details
Product typeAll-in-one router and power mount
CompatibilityStarlink Standard V3 / Gen 3
HoldsRouter + power supply
Install areaWall or fixed indoor surface
Cable usePower cord and network cable organization
Best locationHome, cabin, office, utility area
GoalCleaner equipment management

Best use cases
Home or office installKeep the router and power supply off desks, floors, and shelves for a cleaner fixed setup.
Cabin and remote propertyOrganize equipment in a utility area where cables and power should stay in one place.
Network panel areaPlace the Standard V3 router near cable entry, power, and other network gear.

Complete the Gen 3 setup

A strong match when the setup needs a dedicated replacement or backup power option.
View product
Add reach when the dish cable entry and indoor router mount are not close together.
View product
Pair the indoor router organization with a cleaner outdoor dish mounting position.
View product
Important notes
FAQ
Yes. It is designed for Starlink Gen 3 / Standard V3 router and power supply organization.
Yes. The mount is designed to organize the Standard V3 router and power supply together.
No. This is for organizing the router and power supply area. Outdoor dish mounts are separate products.
Yes. The bracket layout helps organize the power cord and network cables behind or around the mounted equipment.
Install it on a suitable wall or fixed indoor surface near safe power, cable entry, and the planned network area.
A Gen 3 power supply adapter, Gen 3/Mini replacement extension cable, and Gen 3 outdoor dish mount are strong related products for a complete setup.

Snaps onto the router smoothly and secures the power brick. Perfect for tidying up my office wall.
Having both the router and power supply on one mount makes installation so much simpler and cleaner. Highly recommended.
Holds the Gen 3 power brick and router securely without blocking ventilation or Wi-Fi signal. Highly recommend CTMods!
Having both the router and power supply on one mount makes installation so much simpler and cleaner. Highly recommended.
Brilliant engineering! Both the router and power supply lock in tightly. Cable management slots make it look super neat.
Holds the Gen 3 power brick and router securely without blocking ventilation or Wi-Fi signal. Highly recommend CTMods!
Mounted this inside my utility closet to keep the Gen 3 router and power unit off the floor. Looks custom made and professional.
If you hate messy wires hanging around your wall, get this immediately. Holds both components solidly and keeps cables organized.
Doesn't trap heat around the power supply unit. Airflow channels are well thought out and overall build is very rigid.
If you hate messy wires hanging around your wall, get this immediately. Holds both components solidly and keeps cables organized.
The built-in cable channels keep extra wire length wrapped up cleanly. Best mount available for the Starlink V3 router.
Came with all necessary screws and wall anchors. Took less than 10 minutes to mount under my desk. Very sturdy plastic build.
Snaps onto the router smoothly and secures the power brick. Perfect for tidying up my office wall.
Having both the router and power supply on one mount makes installation so much simpler and cleaner. Highly recommended.
Before this bracket, my router and power supply were sitting on the floor behind my desk. Now everything is neatly wall mounted!
Snaps onto the router smoothly and secures the power brick. Perfect for tidying up my office wall.
Heavy duty molded bracket, clean finish, and straightforward installation. Exactly what I needed for my setup.
Holds both units securely to the wall. Bracket plastic is sturdy, though wall anchors could be slightly better quality.
Serves its purpose well for mounting the router and power supply together. A bit tight on cable routing, but holds up fine.
Clean look and strong material. Holds both units securely on the wall without any sagging.
Came with all necessary screws and wall anchors. Took less than 10 minutes to mount under my desk. Very sturdy plastic build.
Doesn't trap heat around the power supply unit. Airflow channels are well thought out and overall build is very rigid.
If you hate messy wires hanging around your wall, get this immediately. Holds both components solidly and keeps cables organized.
Brilliant engineering! Both the router and power supply lock in tightly. Cable management slots make it look super neat.
Holds both units securely to the wall. Bracket plastic is sturdy, though wall anchors could be slightly better quality.
The built-in cable channels keep extra wire length wrapped up cleanly. Best mount available for the Starlink V3 router.
Holds both the router and power supply firmly on the wall. Cable wrap space is a bit snug, but overall works great!
Mounted inside my RV cabinet. Holds up great even when driving over rough roads — no wobbling or sliding.
If you hate messy wires hanging around your wall, get this immediately. Holds both components solidly and keeps cables organized.
The router snaps in with a satisfying click and the power supply bracket holds tight without slipping. Very pleased with the quality.
Mounted this inside my utility closet to keep the Gen 3 router and power unit off the floor. Looks custom made and professional.
This all-in-one wall mount completely cleaned up my router and power supply setup. Everything fits snugly into place without clutter.