-
مبيع
-
-
-
-
حامل ستارلينك الجداري للميزاب من الجيل الثالث، بقوس قابل للتعديل
حامل ستارلينك الجداري للميزاب من الجيل الثالث، بقوس قابل للتعديل
رمز التخزين التعريفي:XL0173
وصف المنتج
قم بترقية تركيب Starlink Gen 3 الخاص بك باستخدام حامل الحائط القابل للتعديل هذا، المصمم لتحسين وضع الطبق للحصول على مسار إشارة أوضح. بفضل التمديد والارتفاع وزاوية الرؤية القابلة للتعديل، فإنه يساعد على وضع Starlink بعيدًا عن تداخل السقف مع الحفاظ على مسار الكابل أكثر نظافة وتنظيمًا. مثالي للتثبيت على الجدران الخارجية والمظلة، يوفر هذا الحامل حلاً عمليًا لإعداد Starlink أكثر استقرارًا ومرونة.
الميزات الرئيسية
- مصمم لـ Starlink Gen 3
مصمم خصيصًا لـ Starlink Gen 3 (قياسي)، ويوفر حل تثبيت آمنًا ومستقرًا لتثبيت أنظف وأكثر موثوقية.
- ارتفاع وتمديد قابل للتعديل
يتميز الحامل بهيكل قابل للتعديل يساعد على وضع طبق Starlink الخاص بك أعلى وأبعد عن الجدار للحصول على وضع أفضل.
تعديل الطول: 9.4-14.5 بوصة
تعديل الارتفاع: 15.9-25.2 بوصة
- زاوية قابلة للتعديل 90 درجة - 180 درجة
يسمح لك تعديل الزاوية المرن بضبط موضع الطبق للحصول على إعداد أكثر مثالية وتحسين أداء الإشارة.
- يساعد على تقليل إعاقة إشارة السقف
من خلال تمديد الطبق بعيدًا عن خط السقف، يساعد هذا الحامل على تقليل انسداد الإشارة ويمنح Starlink الخاص بك رؤية أوضح للسماء.
- تصميم مدمج لإدارة الكابلات
يساعد تصميم توجيه الكابلات المدمج على الحفاظ على الأسلاك أكثر نظافة وتنظيمًا مع توفير حماية إضافية من التعرض للعوامل الجوية الخارجية مثل المطر والثلج.

- 5 stars: 65 (81%)
- 4 stars: 10 (13%)
- 3 stars: 5 (6%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Strong mounting plate and heavy bolts included. Cleared our roof overhang perfectly and held steady through a recent thunderstorm.
High quality metal, weather-resistant finish, and zero wobble even in high winds. Best eave mount option out there for Starlink.
Good thick metal plate and secure mounting hardware. Gives me complete peace of mind during storms.
Mounted directly onto our eave fascia board. Holds the Gen 3 dish securely and looks like a clean OEM install.
Being able to adjust the angle on both axes helped bypass trees easily. Signal quality improved immediately.
Being able to adjust the angle on both axes helped bypass trees easily. Signal quality improved immediately.
Everything aligned perfectly during assembly. The bolts and locking points hold tight without slipping.
Allows full rotation and tilt so you can position your Starlink Gen 3 precisely where it needs to point.
Does the job well for eave mounting. Make sure to pre-drill properly into the studs/fascia board as the bolts are thick.
Adjusting the angle was a breeze. Once tightened down, the dish doesn't budge at all.
If you need an eave or wall mount for Gen 3, this is the one to get. Precise fit and solid materials.
Mounted directly onto our eave fascia board. Holds the Gen 3 dish securely and looks like a clean OEM install.
Installed this bracket under my roof eave for the Starlink Gen 3. Heavy duty hardware, clear instructions, and the adjustable angle allowed me to get perfect line of sight.
Being able to adjust the angle on both axes helped bypass trees easily. Signal quality improved immediately.
Good thick metal plate and secure mounting hardware. Gives me complete peace of mind during storms.
Adjusting the angle was a breeze. Once tightened down, the dish doesn't budge at all.
Adjusting the angle was a breeze. Once tightened down, the dish doesn't budge at all.
The tilt mechanism works smoothly and locks tightly in place. Mounted it to my fascia board without any trouble.
Being able to adjust the angle on both axes helped bypass trees easily. Signal quality improved immediately.
Looks professional on the side of our home. Cables route neatly along the mount arm. Very happy with CTMods quality.
The adjustable angle gave me the exact elevation needed to get over our roofline and avoid trees.
High quality metal, weather-resistant finish, and zero wobble even in high winds. Best eave mount option out there for Starlink.
If you need an eave or wall mount for Gen 3, this is the one to get. Precise fit and solid materials.
Everything aligned perfectly during assembly. The bolts and locking points hold tight without slipping.
Not flimsy plastic or thin aluminum — real solid steel bracket with powder coating that handles weather well.
The bracket mount is extremely sturdy and fits the Gen 3 dish snugly. The angle adjustment made fine-tuning signal alignment very simple.
High quality metal, weather-resistant finish, and zero wobble even in high winds. Best eave mount option out there for Starlink.
Blends right in with the house trim. Handles strong wind gusts with no flexing or vibration.
If you need an eave or wall mount for Gen 3, this is the one to get. Precise fit and solid materials.
Mounting was straightforward. Powder coat finish looks durable. Wish it came with a few extra washers, but works great.
Everything aligned perfectly during assembly. The bolts and locking points hold tight without slipping.
The tilt mechanism works smoothly and locks tightly in place. Mounted it to my fascia board without any trouble.
The adjustable angle gave me the exact elevation needed to get over our roofline and avoid trees.