Less glass occupied
Only the two locking cups contact suitable glass. The main platform stays lower near the dashboard.
Why this layout feels different
Keep the Mini low. Keep more of your windshield clear.
The dashboard supports the main platform while two locking suction cups help hold the setup in position on suitable glass—without drilling into your vehicle.
Starlink Mini is not included. No universal-fit or in-motion claim is made.
Low-profile cabin placementDashboard-supported
4.61 / 5Based on 151 reviews
Low profileMain platform sits near the dash
Dual lockTwo compact glass contact points
No drillingRemovable vehicle placement
Before you buy
Will this mounting approach work in your vehicle?
Use this quick check to rule out the most common fit problems. It is a buying aid, not a universal compatibility guarantee.
0 / 4 checked
4 basic checks remaining.
The low-profile difference
Support below. Secure above.
The design separates support from stabilization: the dashboard carries the low base while two compact suction points meet the windshield.
Dashboard-supported base
Dual locking suction cups
Anti-glare cloth included
A cleaner cabin fit
The Mini sits closer to the shape of the dashboard instead of hanging high on the windshield.
Easy to remove
Move or store the mount without drilling holes or making a permanent vehicle modification.
A clearer power choice
Choose the mount kit alone or the powered kit with the additional 3M vehicle power cable.
A realistic fit, not a blanket promise
Best for temporary, low cabin placement.
Choose this setup when your dashboard can support the platform and your windshield offers two clean, smooth contact areas.
Works best when
- The base sits flat and stable
- Both cups contact smooth glass
- The Mini stays below your normal view
- You recheck the setup after moving it
Choose another setup when
- The dashboard cannot support the base
- The glass is sharply curved or textured
- The mount conflicts with airbags or sensors
- You need a verified exterior or in-motion solution
A repeatable setup
Three checks before every session.
Follow the same order each time: prepare the glass, secure the mount, then install the Mini and check the complete setup.
01
Clean and compare
Clean and dry the glass, then trial-position the empty mount to check dashboard support and arm reach.
02
Rest, press, lock
Keep the base supported by the dash, press both cups flat to the glass, and fully engage both locks.
03
Fit and recheck
Fit the Mini, route the cable with slack, confirm sightline clearance, and gently recheck every contact point.
Know exactly what you are choosing
Mount only, or add vehicle power.
Color does not change the package contents. Choose black or white above, then choose whether you need the 3M power cable.
Mount Kit$49
- Black or white mount
- Black anti-glare cloth
- Starlink Mini not included
Powered Kit$82
- Black or white mount
- Black anti-glare cloth
- 3M vehicle power cable
- Starlink Mini not included
Verified customer proof
What recent buyers noticed.
“The base locks quickly and makes the whole Mini setup feel less awkward.”
“The mount base is easy to use, holds well, and makes the Mini setup feel much more organized.”
“The suction has stayed strong through several parked sessions in warm weather.”
Questions buyers ask before ordering
Clear answers, including the limits.
Start with fit if you are unsure. Choose a topic to see only the answers that matter to your decision.
No. The main platform is designed to sit low near the dashboard. Only the two locking suction cups contact suitable vehicle glass.
No universal-fit claim is made. A good setup needs enough dashboard support, two suitable glass contact areas, and safe clearance from mirrors, airbags, sensors, vents, controls, and the driver's normal field of view.
Use the product photos to compare the base position with your own dashboard. If the platform cannot rest low and stable, or the suction arms cannot reach smooth glass without strain, this may not be the right placement for your vehicle.
Clean, smooth, dry, non-porous vehicle glass. Remove dust, grease, wax, moisture, and residue before installation. Textured surfaces and tight glass curves can reduce contact.
Press both cups flat, engage both locks, confirm the dashboard base is supported, keep cable slack, and gently check every contact point. Recheck the setup whenever it is moved or reinstalled.
This page does not make an in-motion claim. Before driving, follow local rules and CTmods' final usage guidance, and remove or reposition the setup if it can shift, distract, or interfere with visibility, controls, airbags, mirrors, or sensors.
Performance can vary with glass type, tint, metallic coatings, roof structure, sky visibility, dish angle, and surrounding obstructions. The mount provides placement; it cannot guarantee signal conditions in every vehicle.
The selected black or white mount and one black anti-glare cloth. Starlink Mini is not included.
The Powered Kit includes the selected mount, black anti-glare cloth, and a 3M vehicle power cable. Starlink Mini is not included.
No. This is a third-party accessory offered by CTmods for Starlink Mini. Starlink and Starlink Mini are trademarks of their respective owner.
Ready to choose your option?
Compare your vehicle. Then choose above.
Return to the product options to select black or white and decide whether to add the 3M power cable.
Returned to the product options above.
A
Thank you it was great
L
The mount base is easy to use, holds well, and makes the Mini setup feel much more organized.
R
The suction has stayed strong through several parked sessions in warm weather.
R
This mount base stores easily in the glove box and is ready when I need it. Very practical for travel.
I
No complicated installation was needed. The suction mount worked right away and held the Starlink Mini securely.
M
For parked vehicle use, this base is very handy. It holds strongly and makes the Mini easier to aim.
V
This mount is now part of my travel kit because it is quick and reliable.
T
The base is compact but feels solid. It is now part of my Starlink Mini travel kit for quick stops.
E
This mount made our campsite internet setup easier from the vehicle. The Mini stayed placed neatly and did not slide around.
U
The base holds well, removes cleanly, and makes portable Starlink use easier.
G
After cleaning the glass, the mount attached firmly and held position. It is easy to remove when I am done.
O
I wanted a clean way to mount the Mini near the windshield. This base works well and packs away easily.
T
The windshield position helped me get the Mini set up faster and with less clutter.
P
The suction cup grips well when the glass is clean. It gave me confidence using the Mini from my parked SUV.
M
I used it during a long road trip and it helped position the Mini exactly where I needed it. The suction felt firm on clean glass.
P
love this bracket
R
Perfect fit it was packaged well, easy to assemble and install the anti-glare Mat is a great addition. To the kit
J
Installed easy ... holds Great ... Black cover really Helps
A
Just as it was pictured also works very well
A
Excellent product so glad I purchased this one
M
Great product, love the low profile on the dash so no obstruction of the windscreen. Fast delivery. Very satisfied.
A
Todo se ve bien, cumple con lo que ofrecen, actualmemte no tengo el starlink, me lo regresan la proxima seman y lo montar, estoy seguro que va tarabajar perfecto
A
Easy to put to in place clear instructions.
S
Delivery was fast and perfect to secure to vehicle windshield while traveling thru National Parks.
I
Works well and what they advertised
r
Hopefully great still waiting for it to arrive 🥴
B
The mount works as long as the surface is smooth and clean. It took a minute to get the best placement.