01
Suction Cup
Mount to compatible smooth, non-porous surfaces when you want an adjustable, removable setup.
Built for Starlink Mini
Built to Go Wherever Your Starlink Mini Goes.
From windshield to roof to campsite, keep your Starlink Mini protected, positioned, and ready for the next stop.
Protective shell
Purpose-built fit
Three setup styles
One case. More ways to set up.
Choose the Mount That Fits the Moment.
Switch between a removable vehicle setup and a simple flat placement. Your Starlink Mini stays protected without locking you into one way of traveling.
01
02
Magnetic
Attach to compatible steel surfaces for a low-profile setup that is quick to place and remove.
03
Set It Flat
Use the protective case on a table, deck, campsite, or other stable surface with no vehicle mount required.
Always verify surface compatibility and installation before use.
Roof · Glass · Table · Campsite
Inside. Outside. Your call.
One Setup That Adapts to the Way You Travel.
Position your Starlink Mini where the sky view and your vehicle setup make sense, then move it when your plans change.
01Outside the vehicle for campsites, stops, and open-air setups.
02Inside on compatible glass for a cleaner, more sheltered placement.
03Off the vehicle whenever a stable surface is the better choice.
Protection without the bulk
Made to Fit. Built for the Road.
A close-fitting shell helps protect the Starlink Mini while preserving a clean, compact profile for vehicle and campsite use.
01
Purpose-Built Fit
Shaped specifically around Starlink Mini for a secure, integrated look.
02
Protective Shell
Helps shield the device from everyday knocks, dust, and travel exposure.
03
Serviceable Design
Fastened construction makes the setup straightforward to assemble and inspect.
Simple by design
Set Up in Three Clear Steps.
Assemble the case, attach your selected mounting hardware, and check every contact point before use.
Assemble the Case
Seat the Starlink Mini in the shell and tighten the supplied fasteners evenly.
Add Your Mounts
Install either the magnetic feet or the suction cup hardware for your chosen setup.
Place, Check, Go
Clean the surface, secure every mount, and complete a firm pull-check before use.
SELECTED KIT SHOWN
Build your setup
Get the Protection You Need With the Mount You Want.
Start with the protective case, then choose the mounting configuration that fits your vehicle and your routine.
- Starlink Mini protective case
- Mounting hardware for your selected variant
- Fasteners required for assembly
- Compact setup for travel and storage
Starlink Mini device is not included.
OVERLANDING
CAMPING
ROAD TRIPS
REMOTE WORK
01
Flexible Placement
Choose the mounting style that best matches the vehicle, surface, and stop.
02
Compact Protection
Keep the Starlink Mini covered without turning it into a bulky travel setup.
03
Straightforward Setup
A clear assembly process makes the system easier to inspect before each use.
Good to know
Questions Before You Mount?
Everything you need to choose the right setup with fewer surprises.
01Is the Starlink Mini included?
No. This product is a protective case and mounting system designed for Starlink Mini. The Starlink Mini device is sold separately.
02Which mounting kit should I choose?
Choose the suction cup kit for compatible smooth, non-porous surfaces. Choose the magnetic kit for compatible steel vehicle surfaces. If you mainly use Starlink Mini on a stable table or deck, the protective case can also be used without a vehicle mount.
03Can I move the case between vehicles?
Yes. Both removable mounting options support flexible setups. Always inspect and clean the contact surface and follow the supplied installation guidance before each use.
04Will it fit other Starlink models?
No. The case is shaped specifically for Starlink Mini and is not compatible with Standard, Gen 3, Actuated, or Flat High Performance models.
05Can I leave it mounted while driving?
Installation conditions vary by vehicle, surface, weather, and mounting method. Confirm every mount is fully secured before each trip and follow all supplied safety guidance. Do not rely on an unverified setup.
Your next stop is waiting
Protect It. Mount It. Take It Anywhere.
Choose the setup that fits your Starlink Mini and the way you travel.
L
The mount keeps everything tidy and makes Starlink easier to use from the car.
L
This solves the problem of where to place Starlink inside the vehicle.
L
The mount is secure, removable, and well suited for vehicle Starlink use.
K
This interior suction mount works well and keeps the setup clean while parked.
K
The mount stayed firm and helped me keep the Starlink ready during travel stops.
J
This is a good alternative when I do not want the Starlink mounted outside the car.
J
It is simple, compact, and makes my Starlink travel setup easier to repeat.
J
The mount is handy, light enough to carry, and strong enough for regular use.
N
I like that it is removable and stable, though it needs a smooth surface to work best.
Q
The interior mounting idea is good, but the suction cups need careful cleaning and pressure to hold well.
N
It helped organize my Starlink setup inside the vehicle, but installation angle took a few attempts.
L
It helps turn the car into a cleaner mobile office setup with Starlink.
N
The mount is sturdy and clean looking, but packaging could protect the suction cups better.
K
The suction design is practical and the mount is easy to pack with other accessories.
P
It works after careful setup, but I had to reposition it twice before it felt right.
J
I used it for weekend camping and the Starlink stayed secure inside the car.
J
The cabin mount felt stable and kept everything looking organized.
M
This is a good accessory for trips, though the suction cups should be checked before each use.
J
The suction cups held firmly during our trip when installed on clean interior glass.
J
The bracket keeps the Starlink in place without taking over the dashboard area.
J
The suction mount works especially well on clean roof glass and feels secure.
J
No drilling or permanent hardware is needed, which is exactly what I wanted.
J
Keeping the Starlink inside the cabin protects it from rain and dust while parked.
J
This is now part of my travel kit for using Starlink on long drives.
M
It works well for parked use and is easy to remove, but I would like a slightly wider adjustment range.
J
It is easy to reposition on the glass when I need a slightly different angle.
J
The mount fits my car roof area well and keeps the Starlink secure.
I
This is ideal for using Starlink while parked at campsites, rest areas, or work sites.
I
The mount feels better than a basic plastic holder and the suction pads seem durable.
H
Mounting near the roof saves dashboard space and keeps the setup out of the way.
I
The mount held well after a full day of use inside the vehicle.