Enjoy 17% Off Sitewide
1 6

Starlink Mini Windshield Suction Cup Mount Base with Crossbar and Black Anti-Glare Cloth

Starlink Mini Windshield Suction Cup Mount Base with Crossbar and Black Anti-Glare Cloth

Ships within 1-2 business days.

XL0222

$58.00
$58.00
Options
Crossbar Suction Mount For Starlink Mini

Keep Starlink Mini secure, lower, and cleaner inside your vehicle.

A crossbar-style windshield suction mount with EVA support and black anti-glare cloth, built for road trips, RV stops, truck cabins, overlanding, van life, and mobile internet setups.

Crossbar support EVA anti-vibration base Black anti-glare cloth Optional 3M / 5M cable
Starlink Mini windshield suction mount with crossbar and black anti-glare cloth kit

A cleaner alternative to placing Starlink Mini loose on the dash.

Loose placement can slide, rattle, scratch surfaces, and create glare through the windshield. This mount gives the Mini a more stable low-position support point inside the vehicle.

Crossbar stability The wide crossbar layout helps spread support across the mount instead of relying on one small point.
Less vibration feel High-density EVA padding helps absorb cabin vibration and reduce hard contact.
Glare control The black anti-glare cloth helps reduce bright dashboard and windshield reflections.
No permanent install Designed for a temporary vehicle setup without drilling into the dashboard or windshield area.

Dual suction cups plus crossbar support.

The suction-cup structure attaches to suitable smooth glass while the crossbar helps support the Starlink Mini across a wider frame, making the setup feel more organized inside the cabin.

  • Dual suction cups help stabilize the top side of the mount.
  • Crossbar structure supports a more balanced low-profile placement.
  • Works well for RVs, trucks, SUVs, vans, overlanding rigs, and travel vehicles.
Starlink Mini crossbar windshield suction mount product view with dual suction cups

Designed to reduce glare, scratches, and cabin rattle.

The black anti-glare cloth and EVA contact points help make the vehicle setup cleaner during sunny trips, rough roads, and repeated placement.

High-density EVA coating base for Starlink Mini windshield crossbar mount
High-density EVA base Helps reduce vibration transfer and protects contact areas from direct hard rubbing.
Anti-glare cloth Useful when sunlight reflects off the dashboard or windshield during daytime travel.
Scratch-free support Soft contact surfaces help protect your Starlink Mini and vehicle interior.
Compact ABS build Black ABS construction keeps the mount lightweight and easy to store between trips.
Starlink Mini windshield mounting bracket displayed inside vehicle cabin

Lower cabin placement for a more organized vehicle setup.

Instead of building a permanent roof rack or placing the Mini on a loose bag, this mount helps create a repeatable inside-vehicle setup for travel internet.

  • Helpful for dashboard-area Starlink Mini placement during road trips.
  • Keeps the Mini closer to the cabin instead of using a tall interior stand.
  • Good for temporary use when you want to set up, adjust, remove, and pack quickly.
Always mount in a location that does not block visibility, airbags, mirrors, controls, or safe vehicle operation.

Choose the option that matches your power route.

The page offers the mount with black anti-glare cloth by itself, or bundled with a 3M or 5M power cable. Choose based on where your power source sits inside the vehicle.

Starlink Mini windshield suction mount crossbar kit with optional power cable
Mount + cloth Best when you already have the power cable and only need the support mount.
+ 3M power cable Useful for short cabin routes where the vehicle power point is close to the Mini.
+ 5M power cable Better for RVs, trucks, vans, and larger cabin layouts that need extra reach.
Cleaner travel kit Keep mount, glare cloth, and power routing ready for repeat road-trip use.

Made for the way Starlink Mini users travel.

From U.S. highway routes and Canadian RV parks to Australian overlanding and New Zealand coastal drives, this mount is designed for users who need a stable, repeatable cabin setup.

RV travel Use a cleaner dashboard-area support point during campsite and park stops.
Truck routes Reduce loose dash placement and keep the setup easier to repeat between stops.
Van life Keep the Mini supported without building a permanent interior mounting system.
Overlanding Manage vibration, glare, and cable routing during remote travel setups.

Quick setup before your next stop.

The mount is made for repeated travel use. Clean the glass, place the mount, check contact, then route power where it will not create a safety issue.

Clean the glass and dash area Remove dust, oil, wax, moisture, and loose debris before attaching the suction cups.
Attach and press firmly Place both suction cups on suitable smooth glass and confirm the crossbar sits correctly.
Add the anti-glare cloth Position the black cloth where it helps reduce windshield or dashboard reflection.
Connect and check the route Leave safe cable slack and keep wires away from pedals, doors, controls, and sharp edges.
Starlink Mini windshield suction mount installation with anti-glare cloth
Starlink Mini crossbar windshield mount dimensions 26cm 20.5cm and 6.5cm

Check size, surface, and cable route before buying.

Before ordering, confirm that your vehicle has suitable glass, enough dashboard space, and a safe route for the power cable.

Product type Starlink Mini windshield suction mount with crossbar
Included support Crossbar mount + black anti-glare cloth
Optional cable 3M or 5M power cable variant
Material focus Black ABS body with high-density EVA contact padding
Best use Cars, trucks, SUVs, RVs, vans, boats, road trips, camping, and overlanding
This product is for Starlink Mini support only. Starlink Mini and vehicle power accessories are sold separately unless the selected variant clearly includes them.

Check your mounting area before use.

Suction performance and safety depend on your actual vehicle interior. Always test the hold and make sure the setup does not interfere with driving.

Best for

  • Clean, smooth windshield glass
  • Dashboard areas with enough space below the Mini
  • RV, truck, SUV, van, boat, and overlanding travel setups
  • Users who want a removable no-drill cabin mount

Check first

  • Avoid dusty, oily, waxed, wet, or heavily textured surfaces
  • Do not block driver visibility, mirrors, airbags, or controls
  • Keep cables away from pedals, steering parts, doors, and sharp edges
  • Re-check suction and support after heat, cold, or long road sessions
Use only where local rules and vehicle safety allow. Remove or reposition the mount if visibility, cable routing, surface grip, or device placement becomes unsafe.

Build a cleaner Starlink Mini vehicle kit

Pair this crossbar mount with the right power and storage accessories for a more complete travel setup.

Starlink Mini 3-in-1 vehicle power cable
Vehicle power

Starlink Mini 3-in-1 Vehicle Power Cable

Power Starlink Mini from a compatible 12–24V vehicle socket during road-trip, RV, or van use.

View vehicle power →
Starlink Mini 99Wh portable battery pack for camping and RV
Off-grid power

Starlink Mini 99Wh Portable Battery Pack

Add compact portable power when your Starlink Mini setup is away from the vehicle socket.

View portable power →
Starlink Mini EVA Carry Case 2.0 for dish mount cable charger and travel accessories
Travel storage

Starlink Mini EVA Carry Case 2.0

Keep the Mini, mount, cable, charger, and small accessories organized between trips.

View travel case →

Starlink Mini Crossbar Windshield Mount FAQ

Quick answers for RV, truck, SUV, van, boat, camping, overlanding, and road-trip users.

Is this crossbar suction mount made for Starlink Mini?

Yes. This windshield suction mount with crossbar support is designed for Starlink Mini vehicle and travel setups.

What does the black anti-glare cloth do?

The black anti-glare cloth helps reduce bright dashboard and windshield reflections, making daytime vehicle setups cleaner and easier to manage.

Where should I install it?

Use it on clean, smooth windshield glass with enough dashboard space below the Starlink Mini. Do not install it where it blocks driver visibility, airbags, mirrors, or controls.

Does it require drilling?

No. The product is designed as a removable suction-style support mount and does not require drilling into the vehicle.

How do I get the strongest suction hold?

Clean and dry the glass first, remove dust and oil, press both suction cups evenly, and re-check the mount after temperature changes or longer travel sessions.

Should I choose the 3M or 5M power cable option?

Choose 3M for shorter cabin routes and 5M when your power source is farther away, such as in larger RVs, trucks, vans, or rear-cabin layouts.

Is it good for RV, truck, SUV, van, or boat use?

Yes. It is designed for mobile Starlink Mini users in RVs, trucks, SUVs, vans, boats, overlanding vehicles, and road-trip setups, as long as the mounting area is suitable and safe.

What accessories pair well with this mount?

A 3-in-1 vehicle power cable helps with car or RV socket power, a 99Wh portable battery pack helps when you move away from the vehicle, and the EVA Carry Case 2.0 keeps the Mini and accessories organized.

Does this include Starlink Mini?

No. This product includes the selected crossbar mount package. Starlink Mini, battery pack, car charger cable, travel case, and other accessories are sold separately unless a selected bundle clearly states otherwise.

Is this an official Starlink product?

No. This is a CTmods accessory designed for Starlink Mini users who need a vehicle windshield and dashboard support mounting solution.